Wireless RF 433MHz Wall Switch & Receiver Kit | 1/2/3 Gang, No Wiring,

Wireless Light Control Without Rewiring — RF 433MHz Wall Switch & Receiver Kit

Add remote wireless control to any existing light fixture without running new wires or hiring an electrician. This wireless RF 433MHz wall switch and receiver kit lets you mount a sleek wall panel switch anywhere — no wiring required — and control your lights from up to 30 meters away. Available in 1, 2, and 3 gang configurations to suit single or multi-circuit setups.

⚠️ Important — How This System Works: The wall switch panel is an RF transmitter only — it does not connect directly to your lights. It must be used together with the included RF receiver module, which wires into your light circuit and receives the wireless signal. The wall panel itself requires no wiring and can be mounted anywhere.

Key Features

No-Wire Wall Switch Panel — The wall switch panel requires no electrical wiring; mount it anywhere with adhesive or screws; battery powered transmitter sends RF signals to the receiver
1, 2, or 3 Gang Options — Choose the gang configuration that matches your lighting setup; control one, two, or three independent light circuits from a single panel
433MHz RF Signal — Reliable 433MHz ASK modulation with learning code technology; pair multiple remotes or wall panels to a single receiver
AC 85–240V, 10A, Max 1100W — Compatible with standard US and international electrical systems; handles up to 1100W load per channel
Ultra-Low Standby Power — Receiver draws less than 0.3W in standby; energy-efficient and safe for always-on installation
Wide Operating Temperature — Operates from -10°C to +70°C; suitable for indoor and sheltered outdoor installations
CE & RoHS Certified — CE and RoHS certified for safety and quality

How to Pair (Learn Signal)

Press the learning button on the receiver twice
Wait 3 seconds
Press the desired button on the wall switch panel
Wait 3 seconds — pairing is complete

How to Clear All Signals

Press the learning button on the receiver 8 times to clear all paired codes.

Receiver Specifications

Working Voltage: AC 85–240V, 50/60Hz
Frequency: 433MHz
Max Load: 1100W
Standby Power: <0.3W
Receiving Sensitivity: -108dBm
Modulation: ASK (learning code)
Operating Temperature: -10°C to +70°C
Receiver Size: 47.4 × 42 × 22.8 mm
Certifications: CE, RoHS

Perfect For

Renters, homeowners, and DIY enthusiasts who want wireless light control without rewiring. Ideal for adding a switch to a room that lacks one, creating multi-location control, or converting any light to wireless remote operation. Explore our full home and lifestyle collection for more smart home and home improvement products. For wireless switch installation tips, visit CNET’s Smart Home Guide.

Makes a practical gift for homeowners, renters, and DIY home improvers who want flexible, wire-free light control.

*These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Descripción en Español

Control Inalámbrico de Luces Sin Recablear — Kit de Interruptor de Pared RF 433MHz y Receptor

Añade control remoto inalámbrico a cualquier accesorio de iluminación existente sin tender nuevos cables ni contratar a un electricista. Este kit de interruptor de pared inalámbrico RF de 433MHz y receptor te permite montar un elegante panel de interruptor de pared en cualquier lugar — sin cables — y controlar tus luces desde hasta 30 metros de distancia.

⚠️ Importante — Cómo Funciona Este Sistema: El panel del interruptor de pared es únicamente un transmisor RF — no se conecta directamente a tus luces. Debe usarse junto con el módulo receptor RF incluido, que se conecta al circuito de iluminación y recibe la señal inalámbrica. El panel de pared en sí no requiere cableado y puede montarse en cualquier lugar.

Características Principales

Panel de Interruptor de Pared Sin Cables — El panel del interruptor de pared no requiere cableado eléctrico; montálo en cualquier lugar con adhesivo o tornillos; el transmisor alimentado por batería envía señales RF al receptor
Opciones de 1, 2 o 3 Teclas — Elige la configuración de teclas que coincida con tu instalación de iluminación; controla uno, dos o tres circuitos de luz independientes desde un solo panel
Señal RF de 433MHz — Modulación ASK de 433MHz confiable con tecnología de código de aprendizaje; empareja múltiples controles remotos o paneles de pared a un solo receptor
AC 85–240V, 10A, Máx. 1100W — Compatible con sistemas eléctricos estándar de EE.UU. e internacionales; maneja hasta 1100W de carga por canal

Cómo Emparejar (Aprender Señal)

Presiona el botón de aprendizaje en el receptor dos veces
Espera 3 segundos
Presiona el botón deseado en el panel del interruptor de pared
Espera 3 segundos — el emparejamiento está completo

*Estas declaraciones no han sido evaluadas por la Administración de Alimentos y Medicamentos (FDA). Este producto no está destinado a diagnosticar, tratar, curar ni prevenir ninguna enfermedad.