326-Pc Tile Leveling System – Wedges, Spacers & Wrench Kit

Professional Tile Leveling System – 326-Piece Complete Kit

Achieve a perfectly flat, lippage-free tile installation every time with this comprehensive 326-piece Tile Leveling System Kit. Whether you're tiling floors, walls, bathrooms, or outdoor spaces, this kit gives DIYers and professional installers everything needed to keep tiles aligned during adhesive curing. Say goodbye to uneven grout lines and cracked tiles — this system dramatically improves speed, accuracy, and finish quality.

Made in Mainland China.

What's Included (326 Pieces Total)

• 25 × Tile Levelers (T-shaped needle style, reusable)
• 1 × Stainless Steel Wrench for tightening caps
• 100 × 1mm Leveling Cross – ideal for seamless & polished tiles
• 100 × 2mm Leveling Cross – ideal for standard wall tiles
• 100 × 3mm Leveling Cross – ideal for antique bricks & outdoor pavers

Key Features

• ✅ Wear-resistant & reusable – saves money on repeated projects
• ✅ Virtually lippage-free results – tiles sit flush and flat
• ✅ Prevents tile movement while adhesive or cement is curing
• ✅ Reduces fatigue for installers during long jobs
• ✅ Speeds up installation – no more manual checking with a level
• ✅ Minimizes grinding & polishing after installation
• ✅ Easy DIY use – no special training required
• ✅ 3 cross spacer sizes included – versatile for multiple tile types

Specifications

How to Use

1. Lay the first tile, leaving an appropriate gap. Use cross spacers if needed.
2. Insert the T-shaped needle along the tile gap.
3. Rotate the needle 180° so it locks at the base of the two tiles.
4. Tighten the cap by hand or with the included wrench until both tiles are perfectly level.
5. After 4–6 hours (before adhesive is fully cured), rotate the cap in reverse and remove the T-needle by turning 180° until it releases.

Applications

This system works beautifully for floor tiling, wall tiling, bathroom renovations, kitchen backsplashes, outdoor patios, antique brickwork, and more. The three included cross sizes make it adaptable to a wide range of tile types and joint widths.

Related Products You May Like

• 1/2 Inch Plastic Tap Replacement for Water Butt & Rain Barrel
• 1/2" ABS Quick Connector Double Male Hose Coupling Adapter Set

For more guidance on tile installation best practices, visit your local home improvement resources. Learn about safe tool use and construction materials at CDC NIOSH Construction Safety.

Frequently Asked Questions

Q: Are the tile leveling clips and crosses reusable?

A: Yes! The T-shaped leveler clips are designed to be reusable across multiple projects. The leveling crosses are typically single-use, as they are snapped off after the adhesive sets — but the clips and wrench can be saved and used again.

Q: What tile thicknesses does this tile leveling system support?

A: This tile leveling system is compatible with tiles ranging from 5mm to 20mm thick (approximately 0.2" to 0.79"), making it suitable for most standard floor and wall tiles.

Q: How many tiles can I level with this 326-piece kit?

A: With 25 reusable levelers and 300 leveling crosses (100 each of 1mm, 2mm, and 3mm), you can efficiently tile a significant area. Each tile typically requires 1 leveler per corner shared with an adjacent tile, so this kit covers a generous DIY or professional installation.

Q: Can this system be used for both floor and wall tiles?

A: Absolutely. This tile leveling kit is designed for both floor and wall tile applications. The three included cross sizes (1mm, 2mm, 3mm) let you match the right joint width for seamless tiles, wall tiles, and outdoor pavers alike.

Q: When should I remove the leveling clips after installation?

A: Remove the T-shaped needle clips approximately 4–6 hours after leveling, before the cement or tile adhesive fully dries. Rotate the cap in reverse and twist the needle 180° to release it cleanly.