5V 3-Pin ARGB Hub Splitter – 10-Port SATA RGB Fan Controller

Take Full Control of Your PC RGB Lighting

Tired of running out of ARGB headers on your motherboard? This 10-Port 5V 3-Pin ARGB Hub Splitter is the ultimate solution for PC builders who want a clean, fully synchronized RGB setup. Powered by a standard SATA connector, it expands a single 5V 3-pin header into 10 ARGB fan/device ports + 1 motherboard control port — giving you 11 interfaces total with zero compatibility headaches.

Why You'll Love It

• Universal Motherboard Compatibility: Works seamlessly with ASUS AURA SYNC, MSI Mystic Light, GIGABYTE RGB Fusion, and ASRock Polychrome Sync via the standard 5V/3-pin D-RGB interface.
• Up to 11 ARGB Connections: Supports 10 fan/device ports plus the main motherboard cable — say goodbye to the frustration of insufficient RGB headers.
• 52cm Motherboard Cable: The generous 52cm (20.47") cable length means you can route it cleanly through even full-tower cases without any tension.
• SATA Power Interface: Draws power directly from your PSU via a standard SATA connector — no extra adapters required.
• Gold-Plated Connectors: Ensure reliable, corrosion-resistant signal transfer for stable RGB synchronization.
• Easy Adhesive Mounting: Built-in double-sided adhesive foam backing lets you mount the hub securely inside your case. The foam also provides insulation protection.
• Premium 3mm Acrylic Build: Durable, lightweight, and looks great even in windowed cases.
• Neat Cable Management: Five fan jacks positioned on each side for balanced, tidy wire routing throughout your build.

Specifications

• Category: 5V 3-Pin ARGB Fan Hub Splitter
• Fan/Device Ports: 10 x 5V 3-Pin ARGB
• Motherboard Interface: 5V / 3-Pin (D-RGB)
• Power Interface: SATA
• Motherboard Cable Length: ~52 cm / 20.47 in
• Connector Finish: Gold-plated
• Material: 3mm Acrylic Sheet
• Fixing Method: Adhesive Backing (double-sided foam)
• Dimensions: ~13 × 9 × 2 cm / 5.12 × 3.54 × 0.79 in
• Weight: ~50 g
• Packaging: Anti-static bag
• Country of Origin: Made in China

Important Note

This is a hub, not an adapter. It expands the number of available 5V 3-pin ARGB ports; it does not convert between different pin configurations. Your motherboard must have a 5V 3-pin header, and all connected devices must also use the 5V 3-pin interface. Do not attempt to connect 4-pin (12V) devices to this hub.

Build Smarter — Pair It With These

Complete your build with other accessories from our store:

• 1-In-2-Out HDMI Splitter Cable 1080P 3D – TV Monitor Projector
• 1.8M DisplayPort to HDMI Cable 4K DP Adapter – PC TV Monitor

Learn More About PC Building Best Practices

For guidance on safe PC assembly and electrical safety standards, visit the U.S. Consumer Product Safety Commission (CPSC).

Learn more: Computer fan control

Frequently Asked Questions

Q: Is this ARGB hub compatible with ASUS AURA SYNC, MSI Mystic Light, and GIGABYTE RGB Fusion?

A: Yes! This 5V 3-pin ARGB hub splitter is fully compatible with ASUS AURA SYNC, MSI Mystic Light, GIGABYTE RGB Fusion 2.0, and ASRock Polychrome Sync. As long as your motherboard has a 5V 3-pin D-RGB header, all connected fans and devices will synchronize automatically through your motherboard's software.

Q: Can I connect 4-pin (12V) RGB fans to this hub?

A: No. This hub is designed exclusively for 5V 3-pin ARGB devices. It is not compatible with 4-pin 12V RGB fans or headers. Connecting incompatible devices may damage your components. Please verify your fans and motherboard header use the 5V 3-pin standard before purchasing.

Q: How does this hub receive power and how many devices can it support?

A: The hub draws power from a standard SATA connector on your power supply unit (PSU), so there's no load on your motherboard's header. It supports up to 10 ARGB fans or devices simultaneously, with one additional port connecting to the motherboard header for full RGB sync control.

Q: How do I mount the hub inside my PC case?

A: The hub features a pre-applied double-sided adhesive foam backing, making installation quick and tool-free. Simply peel the protective layer and press it firmly onto a flat surface inside your case. The foam pad also provides an insulating layer to protect against short circuits.