5-Pack Desoldering Braid – No-Clean Low Residue Solder Wick

5-Pack No-Clean Desoldering Braid – Professional Solder Wick for PCB & Electronics

Whether you're reworking a PCB, swapping mechanical keyboard switches, or removing old components from a motherboard, this 5-pack desoldering braid makes solder removal fast, clean, and precise. Made from pure oxygen-free copper wire, each wick features a fine braid construction that creates powerful capillary action — drawing excess solder away from pads and pins in seconds.

Key Features

• Low-Residue, No-Clean Formula: The no-clean flux coating minimises leftover residue on PCB pads, keeping your boards tidy and reducing follow-up cleaning time.
• Pure Oxygen-Free Copper Wire: Delivers excellent thermal conductivity, oxidation resistance, and anti-corrosion protection for reliable, consistent performance across multiple jobs.
• Fine Braid Capillary Design: Micro-woven construction draws molten solder in quickly and efficiently, even in tight or hard-to-reach spots.
• Wide Working Temperature Range: Melting point of 280 °C; suitable for use between 280 °C and 480 °C — compatible with most standard soldering irons.
• Versatile Applications: Ideal for correcting solder bridges on PCBs, desoldering relays and passive components, re-soldering keyboard switches, removing old wiring, and more.
• Great Value 5-Pack: Comes with 5 rolls so you always have a fresh section of wick ready to go.

Specifications

• Material: Copper wire (oxygen-free)
• Colour: Bronze
• Melting Point: 280 °C
• Working Temperature: 280 °C – 480 °C
• Pack Contents: 5 × Desoldering Braid Rolls
• Country of Origin: Made in China

How to Use

1. Place the desoldering braid directly over the solder joint you want to remove.
2. Press your heated soldering iron tip firmly onto the braid — the solder will melt and wick up into the braid within seconds.
3. Once the solder is absorbed, lift the iron and braid away together.
4. Cut off the used section of braid and store the remainder for the next job.

Related Products You May Need

• 1-Channel SCR Solid State Relay Module DC3-24V 40A Optocoupler
• 10-Pack 12V 3-Pin PC Fan Extension Cable 26cm – CPU GPU Cooler

For guidance on safe soldering practices and electronics workshop safety, visit the OSHA Soldering Safety Resource.

Note: Please allow 1–3 mm differences due to manual measurement. Colours may vary slightly between monitors and actual product.

Learn more: Desoldering

Frequently Asked Questions

Q: What is a desoldering braid and how does it work?

A: A desoldering braid (also known as a solder wick) is a fine copper mesh that uses capillary action to absorb molten solder when heat is applied. You simply place the braid over the joint, press a hot soldering iron onto it, and the melted solder is drawn up into the braid, leaving a clean pad behind.

Q: Is this solder wick compatible with lead-free solder?

A: Yes. The braid works with both leaded and lead-free solder. Its working temperature range of 280 °C to 480 °C covers the higher melting points typical of lead-free alloys, making it suitable for modern electronics rework.

Q: Do I need to add extra flux before using this desoldering braid?

A: No additional flux is required. Each roll comes pre-treated with a no-clean flux that activates with heat, speeding up solder absorption and leaving minimal residue on your PCB pads.

Q: How do I store the unused portions of the braid after a job?

A: After cutting off the used section, store the remaining roll in a cool, dry place away from moisture and direct sunlight. This helps prevent oxidation and keeps the braid ready for your next project.