8-in-1 Universal Garage Door Remote Duplicator – 300–915MHz, Fixed/Rolling/Learning Code, USB-C Rechargeable

8-in-1 Universal Garage Door Remote Duplicator – 300–915MHz | Fixed, Rolling & Learning Code | USB-C Rechargeable

The most versatile garage door remote you’ll ever own. This 8-channel multi-frequency duplicator supports over 16 frequency bands across 300–915MHz and can copy fixed codes, learning codes, and select rolling codes — storing up to 8 different remotes in one device. USB-C rechargeable with a 30–50m range and built-in data recovery so your codes are never lost.

⚠️ Important Notes:

• Cannot copy car key remotes.
• Supports fixed code (e.g. 2262), learning code (e.g. 1527), select rolling code (e.g. HC301), and some non-standard encrypted remotes.
• Not compatible with all rolling code systems — verify your remote type before purchasing.

Key Features

• 📶 8 Channels – Store 8 Remotes in One: Copy and store up to 8 different remote controls across 8 independent channels. Switch between them instantly using the + / − buttons.
• 💻 16+ Frequency Support – 300–915MHz: Covers the widest range of garage door, gate, barrier, and switch frequencies — compatible with the vast majority of RF remote systems worldwide.
• 🔄 Fixed, Rolling & Learning Code Support: Copies common fixed codes (2262), learning codes (1527), select rolling codes (HC301), and some non-standard encrypted remotes.
• 💾 Data Recovery – Never Lose Your Codes: High-quality chip with permanent storage — accidentally cleared codes can be recovered, and data is retained even when the battery is replaced or runs out.
• 🔒 Channel Lock Function: Lock individual channels to prevent accidental switching or overwriting of stored codes.
• 🔋 USB-C Rechargeable: Built-in 3.7V rechargeable battery charges via USB-C (5V). No disposable batteries — always ready when you need it.
• 📍 30–50m Operating Range: Reliable RF signal transmission up to 50 meters — works from your car, driveway, or entry point.

How to Use

1. Clear a Channel: Select channel with + / − buttons. Press both upper-row buttons simultaneously for 2 seconds until LED flashes rapidly. Release.

2. Copy a Remote: Select channel with + / −. Hold original remote and this remote face-to-face. Press the corresponding button on each simultaneously for 3 seconds. LED channel number lights solid = copy successful. Repeat for each button. Change channel to copy a different remote.

3. Recover Codes: Press both middle-row buttons simultaneously for 2 seconds until LED flashes. Release — last saved codes are restored.

4. Lock a Channel: Select channel. Press the 2nd upper-row button and 1st middle-row button simultaneously. LED blinks rapidly = locked. Repeat to unlock.

Specifications

• Channels: 8
• Frequency Range: 300–915MHz (16+ frequencies)
• Code Types: Fixed code, learning code, select rolling code
• Transmit Power: 13dBm
• Operating Voltage: 3.7V
• Operating Current: 30mA
• Charging: USB-C (5V)
• Range: 30–50 meters
• Certifications: CE, RoHS
• High-Concern Chemicals: None
• Model: TX130_8

Explore our Smart Home collection or browse our full product catalog. For guidance on garage door remote compatibility, visit the Family Handyman’s guide to programming garage door openers.

FDA Disclaimer: These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.