4-Button 433MHz Copy Remote for Garage & Roller Shutter Doors

One-Touch Cloning Remote for Garage Doors, Rolling Shutters & Sliding Doors

Say goodbye to hunting for a replacement remote or paying a technician. This compact 4-button 433MHz copy remote control lets you duplicate your existing fixed-code remote in seconds — no tools, no programming menus, just a simple side-by-side button press. Compact, lightweight, and built from durable ABS plastic, it's the quick and affordable solution for garage doors, roller shutter doors, and sliding gates.

Key Features

• Super-Fast Copy Technology — Hold your old and new remotes together, press the matching buttons simultaneously, and the LED confirms a successful clone with 3 quick flashes followed by a steady light.
• 433MHz Fixed-Code Compatible — Works seamlessly with fixed-code receivers. Rolling-code systems require an additional pairing step at the receiver after copying.
• Long Operating Range — Up to 30–150 metres in open areas, giving you reliable access from your driveway or car.
• 4 Programmable Buttons — Copy up to four different commands or doors onto a single remote, even if not all keys match your original.
• IPX6 Water Resistance — The SMG256 chip carries an IPX6 rating, keeping your remote protected against rain and splashes.
• Pocket-Friendly Size — Measures just 6.8 × 3.7 × 1.5 cm and weighs approximately 32 g — easy to attach to a keyring or keep in your glove box.
• ABS Construction — Impact-resistant plastic housing in sleek black stands up to everyday wear.

Specifications

How to Copy Your Remote

1. Place your existing remote and the new remote face-to-face, closely together.
2. Press and hold the matching button on both remotes at the same time.
3. Watch the LED — 3 rapid flashes then a steady light means the copy was successful.
4. Repeat the process for each of the remaining buttons.
5. If copying is unsuccessful, clear the code and repeat the steps.
6. Rolling-code systems only: After copying, walk to the receiver/control board and complete the standard pairing/activation procedure.

Compatible Applications

• Garage doors (fixed-code systems)
• Roller shutter doors
• Sliding gates and barriers
• Access control entry systems (fixed-code)

Not sure if your system uses a fixed code or rolling code? Check your original remote or receiver manual, or feel free to contact us before ordering.

For guidance on wireless frequency standards and safe use of radio-frequency devices, visit the U.S. Federal Communications Commission (FCC). For general consumer product safety information, refer to the U.S. Consumer Product Safety Commission (CPSC).

You May Also Like

• "1% Better Every Day" Motivational Canvas Poster | Wall Art
• "Don't Overthink" Motivational Quote Canvas Wall Art Print

Learn more: Remote keyless system

Frequently Asked Questions

Q: Will this 433MHz copy remote work with my rolling-code garage door system?

A: This remote uses fixed-code cloning technology. If your original remote also uses a fixed code, cloning is plug-and-play. If your system uses a rolling code, you can still copy the signal, but you will need to complete an additional programming or activation step at the receiver/control unit before the new remote will operate the door.

Q: What is the effective range of this remote control?

A: In open areas with no obstructions, the remote operates at a range of 30 to 150 metres. Walls, metal structures, and other radio-frequency devices in the environment may reduce the effective range.

Q: How do I know if the copy was successful?

A: The built-in LED indicator will flash rapidly three times and then remain steadily lit, confirming a successful copy. If the light does not behave this way, clear the stored code and repeat the cloning process.

Q: Is this remote waterproof?

A: Yes — the SMG256 chip used in this remote carries an IPX6 water-resistance rating, meaning it can withstand strong jets of water. It is well-suited for outdoor use in rainy conditions, though it should not be fully submerged.

Q: What does the package include?

A: Each package contains 1 × 4-button 433MHz copy remote control. A battery may or may not be pre-installed; please check the packaging upon receipt.