Oasis Select
2-Pin LED Flasher Relay – Fix Hyper Flash Honda Kawasaki Yamaha
2-Pin LED Flasher Relay – Fix Hyper Flash Honda Kawasaki Yamaha
Couldn't load pickup availability
Stop the Hyper Flash – Upgrade to a Smart LED Flasher Relay
Tired of your motorcycle's turn signals blinking way too fast after switching to LED bulbs? This 2-Pin Electronic LED Flasher Relay is the simple, plug-and-play fix that restores a normal, steady blink rate — no resistors, no rewiring, no hassle. Compatible with Honda, Kawasaki, Suzuki, Yamaha, and virtually any 12V motorcycle using a 2-pin (or 3-pin) OEM connector.
Made in Mainland China.
Why You Need This Flasher Relay
When you replace your stock turn signal bulbs with LEDs, the lower power draw "tricks" the original relay into blinking at hyper-flash speed. This microprocessor-controlled relay is load-independent, meaning it delivers a consistent 75–90 flashes per minute regardless of whether you're running LED, halogen, or mixed bulb combinations — no more frantic blinking or burned-out indicator warnings.
Key Features
- ✅ Load-Independent Design – Works with LED, halogen, or mixed bulb setups
- ✅ Plug-and-Play – Uses your existing OEM 2-pin connector (also fits 3-pin sockets)
- ✅ Microprocessor Controlled – Delivers stable, consistent flash frequency every time
- ✅ Wide Compatibility – Fits Honda, Kawasaki, Suzuki, Yamaha & most 12V motorcycles
- ✅ Handles Heavy Loads – Supports switch loads from 0.02A up to 12A (up to 150W)
- ✅ Extreme Temperature Rated – Operates reliably from -40°C to +80°C (-40°F to +176°F)
- ✅ Compact & Discreet – Short ~12cm lead length keeps installation tidy
- ✅ Only 1 Relay Needed – One unit controls all turn signals on your bike
Technical Specifications
| Operating Voltage | 12V (11V–15V) |
| Switch Load | 0.1W – 150W |
| Max Power | 150W |
| Flash Frequency | 75–90 times/minute |
| Switch Current | 0.02A – 12A |
| Operating Temperature | -40°C to +80°C |
| Cable Length | ~12 cm |
| Connector | 2-Pin (also fits 3-pin) |
| Quantity | 1x 2-Pin Flasher Relay |
Compatible Bulb Combinations
- LED turn signals + Halogen turn signals
- LED turn signals + Incandescent turn signals
- Full LED turn signal setup
What's in the Box?
- 1× 2-Pin Electronic LED Flasher Relay
Related Products You May Like
- 10-Pack 22AWG Glass Tube Fuse Holder 5x20mm & 6x30mm Screw
- 140W Auto-Eject USB-C Cable – Anti-Overcharge Battery Guard
For more information on vehicle lighting regulations and road safety standards, visit the National Highway Traffic Safety Administration (NHTSA) or refer to consumer product safety guidance at CPSC.gov.
Frequently Asked Questions
Q: Will this LED flasher relay fix hyper flash on my Honda, Yamaha, Suzuki, or Kawasaki motorcycle?
A: Yes! This load-independent electronic flasher relay is specifically designed to correct hyper flash caused by low-wattage LED turn signal bulbs on 12V motorcycles including Honda, Kawasaki, Suzuki, and Yamaha models. It regulates blink frequency to the standard 75–90 flashes per minute regardless of bulb type.
Q: Do I need to cut or splice any wires to install this flasher relay?
A: No cutting or splicing required. This relay is a true plug-and-play replacement — it connects directly to your motorcycle's existing OEM 2-pin turn signal relay socket. It is also compatible with 3-pin sockets.
Q: Can I use this relay if I only replaced some of my turn signal bulbs with LEDs and kept some halogen bulbs?
A: Absolutely. This relay supports mixed bulb configurations — LED with halogen, LED with incandescent, or full LED setups — making it perfect for partial LED upgrades.
Q: How many of these relays do I need for my motorcycle?
A: Just one. A single 2-pin electronic flasher relay controls all four turn signals on your motorcycle simultaneously, so you only need to purchase and install one unit per bike.
