2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting Labor-saving

Discover the 2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting Labor-saving — a standout tools pick featuring durable, stainless steel, foldable design for dependable, everyday performance.

Specifications

Description 1: 2.5T 1.5T car jacks

Description 2: Manual Lift Jack

Hign-concerned Chemical: None

Item Type: Car Jacks

Model Name: car jacks

Type: Mechanical Jack

Note: Please purchase the model according to your needs. Thank you.

Model classification:

1.5T size: 321mm × 77mm × 68mm Weight: 1248g

2T rotating interface size: 372mm × 107mm × 90mm Weight: 1620g

2T fixed interface size: 374mm × 86mm × 66mm Weight: 1600g

2.5T size: 371mm × 95mm × 90mm Weight: 1650g

Tool size: 342mm × 48mm × 10mm Weight: 181.6g

Features: easy and simple to use, labor-saving and stable; flexible lifting, easy to operate

Car jack 1.5T:

Parameters: jack size about 36*9CM, lifting height 10-39CM

Cross saving wrench 34*2.3cm, thickness 1cm

Material: steel plate

Car jack 2.5T:

Parameters: jack size about 41.5*9CM, lifting height 10-39CM

Cross labor-saving wrench 34*2.3cm, thickness 1cm

Material: steel plate

Instructions for use:

① before lifting the vehicle parked on a level hard surface, tighten the handbrake to stop the wheels from moving, open the danger warning signs

② Block the wheel diagonally opposite the replacement tire, loosen the replacement nut, but do not unscrew it

③Remove the jack, and use a rocker or wrench to raise the jack to a suitable height first;

④ Place the jack under the jacking part specified by the automobile manufacturer, turn the handle clockwise to make the jack saddle contact with the jacking part and check whether the contact is safe and reliable;

⑤ Then crank the handle to jack up the vehicle to a suitable height, replace the tire and tighten the nut;

Attention to use:

1. Do not overload the use;

2. In order to ensure the normal use of the jack, please keep the jack threads clean and lubricated, before each use, please smear enough oil on the screw;

3. This product can only support, can not be used as a fixed support, support the vehicle is strictly prohibited to enter the car;

4. In the process of supporting the tilt immediately stop using, adjust the position and then use it again
1.5T Features：

2T Features：
2T Features Interface rotation：
Load Capacity - Max Load weight: 2 Ton (4,409 lbs) . Car Lifting Range from 4.52" to 15.35".
Upgraded Scissor Jack - Bi-directional mechanical Design , Both sides move up at the same time, 90% less effort required to lift your vehicle.
More Stable & Durable - Our jack is made of premium steel which make jack have a strong bearing capacity and have a long service life. Thicken and Enlarged base plate ensures a secure footing.
Widely Used - Scissor jack 2Ton Suitable for most vehicle: Sedan, Coupe, SUV, MPV, Hatchback, Crossover and More.It's a good tire change kit for your vehicle. Specification
Type: Scissor Jack
Color: Black
Material: High quality stainless steel
Lifting capacity: 2.0 ton (4400lb)
Net weight: 2.1kg(4.63lb)
Minimum height: approximately 115MM(4.52inch)
Maximum height: approximately 390MM(15.35inch)
Scope: All models

Using Instructions
1. Before lifting, park the vehicle on a level and hard road, tighten the hand brake to prevent the wheel from moving, and open the hazard warning sign.
2. Block the wheel diagonally opposite the replacement tire, loosen the replacement nut, but do not unscrew it.
3. Take out the jack and use a rocker or wrench to raise the jack to a proper height.
4. Place the jack under the jacking part specified by the automobile factory, turn the handle clockwise to make the jack saddle contact with the jacking part, and check whether the contact is safe and reliable.
5. Then shake the handle to raise the vehicle to a suitable height, replace the tire, and tighten the nut.

Note
1. Don't to overload!
2. To ensure the normal use of the jack, please keep the jack thread clean and lubricated. Before each use, please put enough oil on the lead screw!
3.This product can only be supported and cannot be used as a fixed support. When erecting the vehicle, do not enter the vehicle bottom!
4. In case of deflection during the lifting process, immediately stop using and adjust the position before using.

Package List
1x Scissor Jack+Wrench

2.5T Features：

Options

• Color: 2.5T, 1.5T, 2T Rotating Head, 2T

Frequently Asked Questions

Q: What is the 2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting?

A: The 2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting is a quality tools pick. Do not overload the use; 2.

Q: What is the 2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting made of?

A: The 2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting is made from steel plate Car jack 2.5T, measuring 321mm.

Q: Why choose the 2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting?

A: The 2 5T 1 Car Jacks Manual Lift Jack Repair Tool Lifting stands out in our tools range — In order to ensure the normal use of the jack, please keep the jack threads clean and lubricated, before each use, please smear enough oil on the screw; 3.