2.4GHz Mini Electric Skateboard Remote Control + Receiver

2.4GHz Mini Remote Control with Receiver for Electric Skateboard & Longboard

Take full command of your electric skateboard or longboard with this compact, lightweight 2.4GHz Mini Remote Control. Featuring a built-in rechargeable Li-Po lithium battery, a reliable 2-channel receiver, and an enhanced internal antenna for stronger signal stability, this remote is the perfect upgrade for any electric board rider — beginner or experienced.

Disclaimer: This product is not intended to diagnose, treat, cure, or prevent any disease. This listing is for an electronic accessory product only.

Key Features

• 2.4GHz Wireless Frequency — Stable, interference-free connection for responsive control
• Built-In Li-Po Battery — 3.7V 500mAh rechargeable battery included (USB charging port built-in)
• 2-Channel Control — Throttle and LED light channels for complete board management
• Enhanced Signal — Extra internal antenna for extended, more reliable range
• Expanded Throttle Range — Approximately 15% increase in throttle range over standard remotes
• Universal ESC Compatibility — Works with all ESC (Electronic Speed Controllers)
• Fail-Safe Function — Motor stops automatically when remote signal is lost for added safety
• Ultra-Lightweight — Only 48g, ergonomic and easy to grip while riding
• Compact Size — 100 x 52 x 20mm, fits comfortably in the palm of your hand

Specifications

Package Contents

• 1 x Mini Remote Control (2.4GHz)
• 1 x Receiver
• 1 x USB Charging Cable

How to Bind the Transmitter to the Receiver

1. Check that all wires are mounted and the remote is OFF. Insert the bind plug into CH3 (Bind) on the receiver.
2. Switch on the ESC — the receiver red light will begin to flash.
3. Press and hold the bind button on the remote, then turn the remote ON.
4. The transmitter light will change from flashing red to solid red. The receiver light will also become solid red.
5. Once both show a solid red light, binding is complete. Remove the bind plug (this is important so the remote can record the throttle mid-position for fail-safe operation).
6. Turn off the controller — it should flash. Turn it back on and it should return to solid red. Test the fail-safe by closing the remote: if the motor doesn't move, the fail-safe is working correctly. If the motor moves, repeat steps 1–6.

Explore More Accessories You May Like

• 1.35m Selfie Stick Tripod | Bluetooth Remote & Auto Phone Holder
• 1.8m Magnetic Selfie Stick Tripod with Remote – iPhone & Android

For general electric skateboard safety information, visit the CDC Injury Prevention Resource Center.

Frequently Asked Questions

Q: Is the 2.4GHz mini remote control compatible with all electric skateboards and longboards?

A: This 2.4GHz mini remote control is compatible with all electric skateboards and longboards that use a standard ESC (Electronic Speed Controller). It features universal ESC compatibility, making it a versatile replacement or upgrade remote for most DIY and commercial electric boards.

Q: Does the electric skateboard remote come with a battery, and how do I charge it?

A: Yes! The remote includes a built-in rechargeable 3.7V 500mAh Li-Po battery. It charges via the built-in USB charging port using any standard USB cable (USB cable is included in the package). No need to purchase separate batteries.

Q: What is the fail-safe function on this remote control?

A: The fail-safe function is a critical safety feature — if the remote loses connection with the receiver (e.g., if the remote is switched off or goes out of range), the motor will automatically stop. This prevents the board from continuing to accelerate uncontrolled. Make sure to properly complete the binding steps to activate this feature.

Q: How far is the 2.4GHz signal range for this electric skateboard remote?

A: The remote features an enhanced internal antenna that strengthens the signal compared to standard remotes. While exact range may vary based on environmental conditions, the 2.4GHz frequency and extra antenna are designed to provide a stable, interference-resistant connection suitable for typical skateboard riding distances.