12V Motorcycle Heated Handlebar Grip Kit | Winter Hand Warmer

Stay Warm on Every Ride – 12V Motorcycle Heated Grip Kit

Cold-weather riding doesn't have to mean cold hands. This 12V Motorcycle Electric Heated Handlebar Grip Kit wraps your handlebars in gentle, even warmth so you can ride comfortably through autumn and winter. Designed to fit any 12V motorcycle, e-bike, or similar 12V vehicle, the slim heating pads install directly under your existing grips without bulky modifications.

Key Features

• Universal 12V Compatibility – Works with motorcycles, e-bikes, scooters, and any 12V-powered two-wheeler
• Effective Heating Pads – Each pad measures 95 × 80 mm, providing consistent warmth across the full grip area
• Heat-Shrink Sleeve Design – Black heat-shrink tubing locks the pad securely to your handlebars for a clean, factory-like finish
• ON/OFF Switch Included – Conveniently mount the switch on your rearview mirror rod for easy access while riding
• Simple DIY Installation – No special tools needed; a heat gun is all it takes to shrink the outer sleeve into place
• Ignition-Controlled Power – Connects through the ignition key line to prevent battery drain when the bike is off

What's in the Box

• 2 × Heated grip pads
• 2 × Heat-resistant covers
• 1 × Heat-resistant tape
• 1 × ON/OFF switch

Specifications

• Voltage: 12V DC
• Heater Size: 95 × 80 mm
• Sleeve Color: Black
• High-Concern Chemicals: None

Installation Guide

1. Position the heating pad on the handlebar at the correct location.
2. Wrap the pad evenly around the handlebar, paying close attention to the junction edges.
3. Slide the heat-shrink sleeve over the pad, then use a hot-air gun to shrink the sleeve uniformly.
4. Mount the ON/OFF switch on the rearview mirror rod.
5. Connect the power lines to the ignition-key-controlled circuit. Note: Red and Black wires are not polarity-specific but must be connected through the ignition key line.
6. If your bike has no battery, locate and connect to the DC regulator instead.

Made in Mainland China.

Ride Safely in Any Weather

For more motorcycle safety tips and cold-weather riding best practices, visit the National Highway Traffic Safety Administration (NHTSA). You can also explore general vehicle safety guidance at the U.S. Consumer Product Safety Commission (CPSC).

Looking to gear up further? Check out more accessories from our store:

• "1% Better Every Day" Motivational Canvas Wall Art Print – Perfect for your garage or workshop wall
• "Best Seat In The House" Retro Quote Canvas Wall Art Print – A fun addition to any rider's space

Frequently Asked Questions

Q: Will this 12V heated handlebar grip kit fit my motorcycle or e-bike?

A: Yes! This heated grip kit is designed to be universally compatible with any 12V motorcycle, e-bike, scooter, or similar 12V vehicle. As long as your vehicle runs on a 12V electrical system, the heated pads will work seamlessly.

Q: Do I need professional help to install the motorcycle heated handlebar grips?

A: No professional installation is required. The kit comes with easy-to-follow steps. You'll need a standard hot-air gun (heat gun) to shrink the protective sleeve over the pad. Most riders with basic DIY skills can complete the installation at home.

Q: Will leaving the heated grips on drain my motorcycle battery?

A: The kit is designed to be wired through your ignition key line, which means the heated grips will automatically shut off when the ignition is turned off — preventing unnecessary battery drain.

Q: How warm do the heated handlebar pads get?

A: The pads deliver consistent, even warmth across the 95 × 80 mm heating surface, keeping your hands comfortably warm during autumn and winter riding conditions. The ON/OFF switch lets you control usage based on your comfort level.