Oasis Select
12V LED Car Hood DRL Light Strip with Turn Signal & Scan Effect
12V LED Car Hood DRL Light Strip with Turn Signal & Scan Effect
Couldn't load pickup availability
12V LED Car Hood Daytime Running Light Strip with Turn Signal & Dynamic Scan Effect
Upgrade your vehicle's front-end style and visibility with this flexible LED car hood light strip. Featuring a dynamic start-up scanning animation, bright white daytime running light (DRL) mode, and a built-in yellow turn signal function, this strip adds a sleek, modern look to any 12V vehicle. Made in Mainland China.
Key Features
- Dynamic Start-Up Scan: Eye-catching scanning animation activates every time you start your engine for a premium, high-tech appearance.
- Dual Function – DRL + Turn Signal: White LEDs serve as your daytime running lights; yellow LEDs activate as left or right turn signals for enhanced road presence.
- High-Brightness LED Beads: Ultra-bright light beads ensure excellent visibility in all lighting conditions.
- Flexible & Waterproof Design: The strip bends easily to follow the contours of your hood and is weatherproof for year-round use.
- Universal 12V Fitment: Compatible with most 12V passenger cars, SUVs, and trucks.
- Multiple Length Options: Available in 120cm, 150cm, 180cm, 200cm, 220cm, and 240cm to suit a wide variety of vehicle widths.
- Easy DIY Installation: Attaches with included double-sided tape — no drilling required.
Specifications
- Voltage: 12V DC
- DRL Color: White
- Turn Signal Color: Yellow
- Available Lengths: 120cm / 150cm / 180cm / 200cm / 220cm / 240cm
- Material: Flexible LED strip
- Special Features: Flexible, waterproof
- Country of Origin: Made in Mainland China
Installation Guide
Mounting the Strip
- Apply double-sided tape to the two inner sides of the hood cover.
- Press the light strip firmly onto the double-sided tape.
- Tip: Position the cable end near the windshield side — not near the central grille — to keep wiring clear and ensure the hood opens freely.
Wiring Connections
- Yellow wire → Left turn signal; Yellow extension wire → Right turn signal
- Black (negative) + Red to ACC: Strip activates on engine start
- Black (negative) + Red to DRL circuit: Strip activates with DRL
- Black (negative) + Red to low beam: Strip activates with low beams
- Black (negative) + Red to high beam: Strip activates with high beams
Important Notes
- Please allow 0.5–1 inch (1–2.54 cm) variance due to manual measurement.
- Actual color may vary slightly from product images due to screen calibration differences.
Related Products You May Like
- 1-Inch Threaded Brass Ball Valve – Water, Gas & Oil Flow Control
- 1.32" AMOLED Smart Watch – Bluetooth Call, Fitness & Health Tracker
- 1.2L Smart Electric Dehumidifier with Remote & Anion Purifier
For guidance on vehicle lighting regulations and road safety standards, visit the National Highway Traffic Safety Administration or review lamp equipment information on CPSC.gov.
Learn more: Emergency vehicle lighting
Frequently Asked Questions
Q: What vehicle types is this 12V LED hood light strip compatible with?
A: This LED car hood DRL light strip is compatible with most standard 12V passenger cars, SUVs, and trucks. Simply select the length that best matches your vehicle's hood width from the available options (120cm to 240cm).
Q: Can the turn signal function work independently from the daytime running lights?
A: Yes. The yellow turn signal LEDs are wired separately from the white DRL LEDs. Connect the yellow wires to your existing left and right turn signal circuits so they operate independently — the white DRL stays on while the yellow turn signal flashes as needed.
Q: Is the LED strip waterproof enough for everyday outdoor use?
A: Yes, the strip features a waterproof construction that holds up well against rain, splashes, and typical outdoor weather conditions, making it suitable for year-round installation on your vehicle's hood.
Q: How do I choose the right length for my car?
A: Measure the width of your hood along the mounting area before ordering. Available lengths are 120cm, 150cm, 180cm, 200cm, 220cm, and 240cm. Choose the size closest to (but not exceeding) your hood's inner width for the best fit and cleanest look.
