SIKEZHAN 120ml Electronic Contact Cleaner Spray – Fast-Dry Degreaser & Deoxidizer for PCB, Car Connectors & Audio

SIKEZHAN 120ml Electronic Contact Cleaner Spray – Fast-Dry Degreaser & Deoxidizer

Fix poor connections, eliminate static noise, and protect your electronics from oxidation with the SIKEZHAN Electronic Contact Cleaner Spray. This professional-grade 120ml pump spray dries in seconds with zero residue, effectively removing oil, grease, dirt, and oxide layers from circuit boards, car connectors, USB ports, audio equipment, and more. Non-aerosol, non-corrosive, and safe for most plastics, rubber, and metal parts.

Key Features

• Fast Evaporation & No Residue: Dries in seconds, leaving zero sticky residue for clean, reliable connections
• Powerful Deoxidizer: Effectively removes oil, grease, dirt, and oxide layers that cause poor contact and signal loss
• Non-Corrosive Formula: Safe for most plastics, rubber, and metal components
• Safe Pump Spray: Non-aerosol, non-pressurized design for safer shipping and precise, waste-free application
• Wide Application: Automotive, PC/peripherals, audio/HiFi, and general electronics maintenance
• 3-Year Shelf Life: Long-lasting formula for ongoing maintenance needs

Applications

• Automotive: Car sensor plugs, fuse boxes, ignition connectors, battery terminals — solves circuit failures caused by oxidation
• PC & Peripherals: Motherboards (PCB), RAM slots, USB ports, gaming controller drift
• Audio & HiFi: Eliminates crackling noise in volume knobs (potentiometers), faders, and amplifier switches
• General Electronics: Any connector, plug, or contact point affected by corrosion or contamination

How to Use

1. Turn off the device and disconnect power before cleaning.
2. Hold the bottle 10–15cm from the surface, or attach the extension nozzle for tight spots.
3. Spray liberally onto the contact area.
4. Allow the liquid to evaporate completely (a few seconds to one minute).
5. Reconnect power once fully dry.

Product Details

• Brand: SIKEZHAN
• Capacity: 120ml / 4.2 fl.oz
• Form: Liquid Pump Spray (Non-pressurized)
• Shelf Life: 3 Years
• Free From: High-concern chemicals

Learn More & Related Products

Explore our full range of electronics tools & accessories. For expert guidance on contact cleaner use, visit iFixit or Electronic Design.

Warning

Use in a well-ventilated area. Keep away from open flames and heat sources during application. Avoid contact with eyes and skin — wear protective gloves if sensitive. If contact with eyes occurs, rinse immediately with water and seek medical attention. Keep out of reach of children. Store in a cool, dry place away from direct sunlight. Dispose of in accordance with local regulations.

FDA Disclaimer: These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Descripción en Español

Spray Limpiador de Contactos Electrónicos SIKEZHAN 120ml – Desengrasante y Desoxidante de Secado Rápido

Repare conexiones deficientes, elimine el ruido estático y proteja sus dispositivos electrónicos de la oxidación con el Spray Limpiador de Contactos SIKEZHAN. Este spray de bomba profesional de 120ml se seca en segundos sin dejar residuos, eliminando eficazmente aceite, grasa, suciedad y capas de óxido de placas de circuito, conectores de automóviles, puertos USB, equipos de audio y más.

Características Principales

• Evaporación Rápida y Sin Residuos: Se seca en segundos sin dejar residuos pegajosos
• Potente Desoxidante: Elimina eficazmente aceite, grasa, suciedad y capas de óxido
• Fórmula No Corrosiva: Segura para la mayoría de plásticos, goma y piezas metálicas
• Spray de Bomba Seguro: Diseño sin aerosol para una aplicación precisa y sin desperdicio
• Amplia Aplicación: Automotriz, PC, audio/HiFi y mantenimiento general de electrónicos

Modo de Uso

1. Apague el dispositivo y desconecte la alimentación antes de limpiar.
2. Sostenga el frasco a 10–15cm de la superficie o use la boquilla de extensión para espacios reducidos.
3. Rociar abundantemente sobre el área de contacto.
4. Deje que el líquido se evapore completamente (de unos segundos a un minuto).
5. Reconecte la alimentación una vez completamente seco.

Aviso de la FDA: Estas declaraciones no han sido evaluadas por la Administración de Alimentos y Medicamentos. Este producto no está destinado a diagnosticar, tratar, curar ni prevenir ninguna enfermedad.