YLY-2088 400W Adjustable 2-Way Speaker Crossover Filter

Take your sound system to the next level with the YLY-2088 400W Adjustable 2-Way Speaker Crossover Filter. Whether you're building a home audio setup, upgrading your car speakers, or fine-tuning a 2.1-channel system, this professional-grade frequency divider gives you precise control over treble and bass — no soldering required.

Key Features

• Fully Adjustable & Versatile: Works with high-frequency + low-frequency two-way speakers, 2.1-channel satellite boxes, car full-range speakers, or standalone tweeter/woofer setups. Supports 4–16 ohm impedance and up to 400W of power.
• Premium Components: Features pure copper jumpers with ABCD four-position selection, high-quality copper wire inductors, capacitors, and a fiberglass circuit board for reliable, clean signal separation.
• Professional Solder Joints: Built using precision point-soldering technology with evenly filled, bright solder joints for long-lasting electrical integrity.
• Oxygen-Free Copper Inductors: Wound with 0.8mm oxygen-free copper wire and paired with a 100µF large-capacity capacitor for accurate, low-distortion crossover performance.
• No Soldering Needed: Easy screw-terminal wiring connections let you set up and adjust your crossover in minutes using just a small flathead screwdriver.
• Customizable Sound Profiles: High-frequency settings include weak/medium/strong; low-frequency settings include full sound/low sound/strong bass/medium sound — dial in your perfect mix.

Specifications

• Model: YLY-2088
• Power: 400W
• Impedance: 4–16 ohms
• Inductor: 0.8mm oxygen-free copper wire
• Capacitor: 100µF large-capacity
• Size: 2.75 x 1.96 x 0.98 inches (7 x 5 x 2.5cm)
• Weight: 75g
• Package Includes: 1x Speaker Frequency Divider

Wiring Guide

• Input: Connect to power amplifier or rear junction box
• TREBLE: Connect to tweeter
• BASS: Connect to bass/woofer speaker
• Full-range coaxial: Connect speaker to BASS position, then bridge a small wire from bass positive to tweeter positive

Helpful Audio Resources

• Audioholics: Speaker Crossover Basics — a beginner-friendly guide to understanding crossover filters.
• Parts Express — a trusted resource for speaker components, wiring, and DIY audio builds.

Note: Due to monitor and lighting variations, actual color may differ slightly from images. Please allow 1–2cm variance due to manual measurement.

Disclaimer: This product has not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Español

Lleva tu sistema de sonido al siguiente nivel con el Filtro Divisor de Frecuencias de 2 Vías YLY-2088 de 400W. Ya sea para audio en casa, altavoces de auto o un sistema 2.1, este divisor de frecuencias profesional te da control preciso sobre agudos y graves — sin necesidad de soldar.

Características Principales

• Totalmente Ajustable y Versátil: Compatible con altavoces de 2 vías, sistemas 2.1, altavoces de auto y configuraciones individuales de tweeter o woofer. Soporta impedancias de 4–16 ohmios y hasta 400W.
• Componentes Premium: Puentes de cobre puro con selección de cuatro posiciones ABCD, inductores de hilo de cobre, condensadores y placa de fibra de vidrio.
• Sin Soldadura: Conexiones de terminal de tornillo fáciles de usar con un pequeño destornillador plano.
• Perfiles de Sonido Personalizables: Ajustes de agudos: débil/medio/fuerte; ajustes de graves: sonido completo/graves bajos/graves fuertes/sonido medio.

Especificaciones

• Modelo: YLY-2088
• Potencia: 400W
• Impedancia: 4–16 ohmios
• Tamaño: 7 x 5 x 2.5 cm
• Peso: 75g
• Contenido: 1x Divisor de Frecuencias

Nota: El color real puede diferir ligeramente de las imágenes. Permita una variación de 1–2 cm por medición manual.

Descargo de responsabilidad: Este producto no ha sido evaluado por la Administración de Alimentos y Medicamentos (FDA). Este producto no está destinado a diagnosticar, tratar, curar ni prevenir ninguna enfermedad.